File Elica  

How To Fix Black Screen In Windows 10

The only worst thing than a blue screen of death is a black screen of death. And another worst thing than a black screen of death is a black screen, which doesn’t even throw out a bone by telling you what wrong is happening. In Windows 10, this can happen generally. The number of users has reported black screens during the installations, updates, or completely random. Sometimes nothing appears on the screen. Other times, you may have the mouse and keyboard but no desktop environment.

How To Resolve Black Screen issue During/After the Installation of Windows 10

Black screens are encountered sometimes when you install Windows 10 for the first time, and it may happen during Windows 10 install process or just after the windows setup is complete. There are few potential causes:

  1. Probable Cause: Setup is still in progress. If you have the large personal data file set that you have been migrating from the previous windows installation process, the Windows 10 setup process could take several hours.
  2. Possible Solution: Then, Observe the hard drive activity LED that is close to examine if the computer is still working or not. If the LED is still blinking, that means it is working.
  3. Probable Cause: Setup is Stuck. The setup process hung up on something, and we can not proceed further for whatever decision it is.
  4. Possible Solution: Switch Off your computer completely and try again. Then follow these steps:
  5. Turn Off the computer completely. If it doesn’t shut down, then hold the power button for 5 to 10 seconds until it shuts down.
  6. Then disconnect it from the internet by unplugging the Ethernet cable or turn off the wireless adapter.
  7. Disconnect all the unnecessary peripherals from the computer. Then remove the external hard drives, game controllers, phone chargers almost everything but the keyboard and the mouse.
  8.  Remove the power from your PC. Disconnect the power cord from the outlet. If it is a laptop, then remove the battery, too. Wait for at least 30 seconds before plugging down your computer back in.
  9. Then connect the system to power again but leave the internet disconnected—power on the PC.
  10. Hopefully, Windows will then try to resume or restart the windows ten setup process.
  11. Suppose the installation process gets completed normally, and you get to a windows desktop with the Start menu. In that case, everything then goes ahead and reconnect to the internet to finish downloading and applying updates.
  12. If the setup rolls back to the previous version of Windows, try to update it manually using the Media Creation Tool.
  13. Probable Cause: As The black screen is caused by the device driver or hardware performance issue.
  14. Possible Solution: Try to boot into the Safe Mode.

How To Fix Black Screens During Windows Out Of Box Experience

Windows out of box experience, and it is not unlike an out of body experience, it is a very weird transitionary phase where magical things happen, but things are not all there yet.

If you get the black screen during the OOBE, there are few things that you can try. What are they? Let’s peep into it:

  1. Probable Cause: video output is routed to a various display adapter or a different output. Sometimes the display configuration you have in your previous windows installation does not carry over correctly to windows 10.
  2. Possible Solution: Try out physically disconnecting the video cable from one adapter or output and trying another.
  3. If you have any extra monitor that you can then try connecting to that instead of it.
  4. If you normally connect to the discrete graphics card, but your PC has an onboard graphics adapter, switch to it instead.
  5. If you are using the television set, check to make sure it is turned on and set up to the PC’s input. The video output may be going to the Television.
  6. Probable Cause: video output is sent to the Wrong display. If you have multiple displays that are connected, then the windows setup can sometimes get confused.
  7. Possible Solution: Try projecting the output to another monitor by pressing the Windows Key+ P then choosing the correct option.

Steps to Fix Random Black Screens Advanced Troubleshooting the Options To Try

  • , click on the File menu and then Run New Task, Type the cmd, and then hit the Enter button. Type “Shutdown  -r -t 01” and press the Enter tab. This will then restart your PC.

Steps To Use The Safe Mode To Troubleshoot The Black Screens

  1. Click on the Troubleshoot command.
  2. Click on the Advanced options.
  3. Click on the Startup Settings.
  4. Click on the Restart Button.
  5. Press the number 4, and it will start Windows 10 in the Safe Mode. 
  6. Sign In and Press the Windows key + X, click on Device Manager and extend the Display Adapter, and Right-click on the display driver, then click Disable.
  7. Then Restart your computer to see if the setup completes successfully, or you can boot to the desktop. 

Leave A Comment